Sign Tray Fabrication

Manufactured from 3mm aluminium composite and available in a range of colours and finishes, the sign trays (folded pans) provide a robust, long lasting signage solution for exterior use.

Use the quote system below to get a price and add this to your order. Then just pay online and we will produce and despatch your job within 2-3 working days.

If you have any queries please email fabrication@mdpsupplies.co.uk.

To reduce risk of damage in transit our trays are supplied flat, ready for installation, for installation instructions click here.

Custom Sign Tray

Dimensions

Specify the sizing of the face of the sign tray and enter the depth of the return.

Maximum Width

There is no maximum width but trays widths (inc returns) greater than the following have to be manufactured as multiple panels. These are supplied with tongue & groove joining strips for on-site application.
Standard colours - 3000mm
Special finish colours - 2400mm

Maximum Height

Due to the sheet size the following are recommended maximum heights (inc returns) for panels
Standard colours - 1460mm
Special finish colours - 1200mm
We can supply trays larger than this but there will be more joins as the sheets need to be used portrait.

Upstand

This is an additional lip at the back of the tray on the top, it is used when you can't get fixings into the top of the tray, such as under a canopy. This measurement is in addition to the face size of the tray, please take this into account when measuring and ordering.

Downstand

A downstand is the same as an upstand but on the bottom of the tray.

Width mm Height mm Depth mm

Upstand mm Downstand mm

Select The Colour

Choose the colour of the aluminum composite. Click help for colour chart.

Standard colours available in matt or gloss finish.
Aluminium Composite colours available

Choose The Fixings

Which type of fixings would you like us to provide.

We can supply the tray with the following options;

a) Without fixings

b) With aluminium angle cut to the required length for both the top and bottom of the sign

c) With the angle and fixing kit the tray is pre-drilled and countersunk. This option also includes the screws to attach the tray to the angle and coloured screw-caps to match the tray colour.

Screws for fixing angle to the surface are not included as you will need different fixings depending on the wall type.

If your tray is manufactured from multiple panels (due to the width) all aluminium angle will be supplied in lengths for each seperate panel.

Costings

Based on the information entered above the price for the manufacture of the sign tray is shown below.

£-.--

If the delivery address is not on the UK Mainland or is a remote area of Scotland and the packed job will be larger than a metre, we may need to apply a delivery surcharge. We will contact you, before we cut the job, if this is necessary.