Gasket And Reach Tools

The Conquerer is a corner reach tool. With a soft squeegee blade along one edge and pointed hard card tips on the ends. more info.

Blade length: 163mm / 6.5 inches

The Conquerer Blue is a corner reach tool like the yellow version but with a harder squeegee blade. Squeegee along one edge and pointed hard card tips on the ends. more info.

Blade length: 163mm / 6.5 inches

The overall length is just under 370mm giving a longer reach. The Titan squeegee has a rigid structure for more water removal, and its unique design will easily lift inner and upper door seals. more info.

Blade length: 380mm / 15 inches

Double edged squeegee. Use the rigid edge for heavy applications and the rubber based edge for thin films which will help protect against tearing and scratching. 3 inch wide application edge.

The side swiper squeegee is for getting behind brake lights and in lower areas of rear windows. more info.

For replacement blades see wtt0072.

The slammer tool is designed for cleaning along gaskets and reaching corners. more info.

Total tool size: 185mm x 150mm

The Slim Foot has a slender design that can reach into tighter openings. This no rib squeegee helps reach behind brake lights and has a rubber grip for secure handling. more info.

The handle is wrapped with genuine Head SofTac traction grip material. Tip to handle is 380mm / 15 inch, blade is 155mm / 6 inch.

The Bulldozer allows you to get to hard to reach areas such as behind brake lights, low angles and rear windows. more info.

Total length: 380mm
Blade width: 150mm

Back Jabber reach tool from Fusion Tools. Used for applying and squeegeeing down tint in hard to get to areas, such as the bottom of windscreens. more info.

The urethane application edge has a pre-fitted Fusion Slick Strip so it glides across the surface. Replacement strips available.


Total length: 380mm
Blade width: 150mm

Junior Jabber reach tool from Fusion Tools. Used for applying and squeegeeing down tint in hard to get to areas, such as the bottom of windscreens. Slightly smaller and narrower in design than the Back Jabber. more info.

The urethane application edge has a pre-fitted Fusion Slick Strip so it glides across the surface. Replacement strips available.


Total length: 380mm
Blade width: 125mm

EZ Flex Back Jabber reach tool from Fusion Tools. More flexible than the orange Back Jabber. Used for applying and squeegeeing down tint in hard to get to areas, such as the bottom of windscreens. more info.

The urethane application edge has a pre-fitted Fusion Slick Strip so it glides across the surface. Replacement strips available.

Total length: 380mm
Blade width: 150mm

Slick Strips are PTFE infused adhesive tape strips that make your squeegees and hard cards glide across smooth surfaces more info.

Trim to size, peel off adhesive cover strip and apply to your tool. Then remove the cover strip to reveal the PTFE coating.

Pack size: 5
Dimensions: 225x25mm

Use in the Unger Ergo-Tec 6 inch squeegee channel (wtt0076) as a finishing squeegee or as a replacement blade for the Side Swiper (wtt0044). Gives maximum water removal.

Use in the Unger Ergo-Tec 12 inch squeegee channel (wtt0082) as a finishing squeegee. Gives maximum water removal.

Channel squeegee replacement blade. Relatively soft 85 durometer. more info.

Can be used with the Side Swiper (wtt0044) or Unger Ergo-Tec 6 inch squeegee (wtt0076).

Dimensions: 170 x 20mm

Channel squeegee replacement blade. Hardest durometer. more info.

Can be used with the Side Swiper (wtt0044) or Unger Ergo-Tec 6 inch squeegee (wtt0076).

Dimensions: 170 x 20mm